(0)
Compressed cast housing for cost-optimal drive solutions.
Different types of mounting are possible due to the different housing designs; example on picture - housing with foot and inlet flange. Different versions of housings with flanges on the output side of the gear unit (square or round shape) and different shapes on the input side of the gear unit (round and square shapes of adapters and purposive adapters for mounting safety and other couplings).
Very flat shape of the cast housing with a large wheelbase of the output and input sides.
A common alternative to a plug-in axis design (example pictured). Different version of housings with flanges on the output side of the gear unit (square or round shape) and different shapes on the input side of the gear unit (round and square shapes of adapters and purposive adapters for mounting safety and other couplings).
The rigid construction of the housing allows for narrow tolerances. A common alternative to the design with a plug-in axis design. The construction of the housing enables the mounting of the housing with foot or directly on the threaded holes in the housing. In the case of mounted versions, it is possible to attach with torque supports. Different version of housings with flanges on the output side of the gear unit (square or round shape) and different shapes on the input side of the gear unit (round and square shapes of adapters and purposive adapters for mounting safety and other couplings).
Angular design of the housing in small dimensions; especially affordable design for torques on the output side of the gear unit up to 800 Nm. A common alternative to the design with a plug-in axis design. The construction of the housing enables the mounting of the housing with foot or directly on the threaded holes in the housing. In the case of mounted versions, it is possible to attach with torque supports. Different version of housings with flanges on the output side of the gear unit (square or round shape) and different shapes on the input side of the gear unit (round and square shapes of adapters and purposive adapters for mounting safety and other couplings).
Consistent compatibility with modular design for optimal drive solutions. Three-phase asynchronous electric motors for powers from 0,12 to 45 kW are built in 14 sizes for easy installation on each type of reductor housing. Possible versions of additional attachments to motors: brakes, vents with own drive, incremental encoders, absolute encoders, etc.
Possible motor versions for: individual Ex areas, underwater operation, aseptic areas.